Справочник Пользователя для Extron Electronics EXTSL250W
ShareLink 250 W • Using the Embedded Web Pages
43
AP (Access Point) mode
In AP mode, the ShareLink 250 W is configured as a wireless access point. If the ShareLink
is wired to the network, wireless devices may access the network by connecting to the
ShareLink through Wi-Fi.
When AP mode is selected, the Access Point panel appears with the following options:
is wired to the network, wireless devices may access the network by connecting to the
ShareLink through Wi-Fi.
When AP mode is selected, the Access Point panel appears with the following options:
Figure 42.
Access Point Mode
1
SSID: Displays the default SSID of the ShareLink 250 W unit. To change the SSID, type
in the desired SSID and click Apply.
2
SSID Broadcast: Makes the access point visible to wireless clients. SSID broadcast is
enabled by default. Choose Disable to disable SSID broadcast.
3
Band: Select the 2.4 GHz or 5 GHz wireless band.
4
802.11 mode: Default mode is
2.4G G only for the 2.4 GHz band and 5G A/N
mix for the 5 GHz band. Click the drop-down list to display other modes for the 802.11
standard and select the preferred mode for your wireless band:
5
Channel: See
6
Encryption: Click the drop-down list to display these encryption protocol options:
7
Key: After selecting an encryption protocol, enter the network security key.
8
Channel Bandwidth: Set to
Auto by default. Each channel has a bandwidth of
20 MHz or 40 MHz. In auto mode, the device automatically determines which
bandwidth to use. Alternatively, you may select the 20 MHz option.
bandwidth to use. Alternatively, you may select the 20 MHz option.
NOTE: The 40 MHz bandwidth increases data throughput, but also increases the
potential for interference from adjacent channels.