Справочник Пользователя для Intrinsyc Technologies Corporation ITCOQ410S
Intrinsyc Open-Q™ 410 (APQ8016) SOM Module Certification Technical Note 16: OEM Integrator Guide
Rev. 1.1
9
Copyright Intrinsyc Technologies Corporation
subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
WARNING: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates and radiates radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of more of the following measures:
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
WARNING: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates and radiates radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from the one the receiver
• Connect the equipment into an outlet on a circuit different from the one the receiver
is connected to.
• Consult the dealer or an experienced radio or TV technician for help.
The user may find the following booklet prepared by the Federal Communications
Commission helpful:
The Interference Handbook
This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402. Stock No. 004-000-00345-4.
IMPORTANT! Changes or modifications not expressly approved by
[System
Manufacturer Name]
could void the user’s authority to operate the equipment. This
transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
or transmitter.
FCC RF Exposure Requirements:
This product complies with the FCC RF exposure limit set forth for an uncontrolled
environment and is safe for intended operation as described in this manual.
This device is
only authorized for use in a mobile application, at least 20 cm of separation distance
between
between
the radiating
antenna and the user's body must be maintained at all times.
Further
RF exposure reduction can be achieved if the product can be kept as far as possible from the
user’s body or set the device to a lower output power if such a function is available. Separate
approval is required for all other operating configurations, including portable configurations
with respect to 47 CFR Part 2.1093 and different antenna configurations.
user’s body or set the device to a lower output power if such a function is available. Separate
approval is required for all other operating configurations, including portable configurations
with respect to 47 CFR Part 2.1093 and different antenna configurations.