Справочник Пользователя для Intrinsyc Technologies Corporation ITCOQ410S
Intrinsyc Open-Q™ 410 (APQ8016) SOM Module Certification Technical Note 16: OEM Integrator Guide
Rev. 1.1
4
Copyright Intrinsyc Technologies Corporation
5. ALLOWABLE ANTENNAS TO USE WITH THE RADIO MODULE
The Open-Q
TM
410 SOM passed certification testing with the following antenna:
Model
Type
Connector
Peak Gain (dBi)
001-0014 LSR 2.4 GHz FlexPIFA
Antenna w/U.FL cable, 100mm
Antenna w/U.FL cable, 100mm
PIFA
U.FL
2.0
The required antenna impedance is 50 ohms.
Use of other antenna types or the same type of antenna but with higher gain than listed
above is not allowed without additional testing and appropriate FCC or IC approval.
Use of a similar antenna may only require a C1PC to confirm the performance for SAR is
the same or better (i.e. lower) but only an equivalent antenna can be used without any
additional testing.
above is not allowed without additional testing and appropriate FCC or IC approval.
Use of a similar antenna may only require a C1PC to confirm the performance for SAR is
the same or better (i.e. lower) but only an equivalent antenna can be used without any
additional testing.