Справочник Пользователя для Shenzhen Baicheng Innovation Technology Co. Ltd BCPTA
PLUTO TRIGGER
BAICHENG INNOVATIONS
34
8.
S
ETTINGS
8.1.
T
RIGGER
Change these settings to control the timing of trigger signals.
8.1.1.
P
RE
F
OCUS
T
IME
Default: 0 - Manual Focus
Depending on the mode Pluto Trigger is running, you should choose different
focus time.
focus time.
For high-speed photography, fast response is critical. Your camera is set to
manual mode. You should choose “0-Manual focus” to tell Pluto Trigger no need
to focus before release shutter.
manual mode. You should choose “0-Manual focus” to tell Pluto Trigger no need
to focus before release shutter.
If you set your camera to Auto-focus mode and want the camera pre focus
before exposure, then choose appropriate focus time depending on the lightning
condition and your camera model. Please be noted in auto-focus mode camera
will not take picture if it doesn’t get focus. You are not guaranteed to have your
camera triggered in the mode.
before exposure, then choose appropriate focus time depending on the lightning
condition and your camera model. Please be noted in auto-focus mode camera
will not take picture if it doesn’t get focus. You are not guaranteed to have your
camera triggered in the mode.
In time-lapse mode of timer mode, you may like to put your camera into sleep
mode during the long interval to save a lot battery power. Then you can set pre
focus time to “0.5" - Pre Wake Up” in order to wake your camera up before taking
next picture.
mode during the long interval to save a lot battery power. Then you can set pre
focus time to “0.5" - Pre Wake Up” in order to wake your camera up before taking
next picture.
8.1.2.
S
HUTTER
P
ULSE
T
IME
Default: 150ms – Camera
Shutter Pulse Time setting depends a lot on what device your want to trigger. For
speed flash, a shot pulse works fine. For normal cameras, 150mm is adequate. If
that is not enough to trigger you camera, choose longer time.
speed flash, a shot pulse works fine. For normal cameras, 150mm is adequate. If
that is not enough to trigger you camera, choose longer time.
8.1.3.
T
RIGGER
R
ESET
T
IME
Default: 3"