Справочник Пользователя для Shenzhen Baicheng Innovation Technology Co. Ltd BCPTA
PLUTO TRIGGER
BAICHENG INNOVATIONS
36
Default: 0
Set this value to the number of pictures you want to take when Pluto Trigger is fired.
This setting only applies in “Pluto Sensor Modes”.
This setting only applies in “Pluto Sensor Modes”.
8.4.2.
B
URST
I
NTERVAL
Default: 0.5”
Change this setting to set the time interval, at which multiple pictures are taken.
8.5.
LED
Default: “Periodic blink”
Change this setting to set when the Status Led show notifications.
1
Off
All led notifications are turned off
2
Program Start/End
Blink led when Program starts or stops running
3
Camera Trigger
Blink when Pluto trigger your camera
4
Periodic Notification
Blink every 5 seconds, indicating Pluto is power on
5
Always On
Led is always on to show remaining power
8.6.
R
ESET
Reset all the settings to default values.
8.7.
F
IRMWARE
U
PGRADE
When new version is available, you can upgrade the firmware in Pluto Trigger over
the air.
the air.
To upgrade firmware, follow the instructions in the app.