Справочник Пользователя для Trimble Outdoors SPSX51

6 Configuring the Receiver Using the Keypad and Display

70 SPSx51 Modular GPS Receivers User Guide

Managing application files

You can use the front panel to manage application files in the receiver. You can see
which application file the receiver is currently using and then choose to make changes
to it and save it, load a different application file, or delete an application file.

To manage the application files, use the System Setup menu (see

Figure 6.1

). You can

only manage application files when the AutoBase feature is turned off.

To save an application file, configure all the settings you need through the front panel
and then save the file. When you save the file, the receiver provides a default filename,
which you can change, based on the currently set mode. For example:

Note –

If you start an application file that is saved with AutoBase turned on in the file,

then it turns on AutoBase in the receiver, even if it was off before the file was loaded.

Figure 6.1

Application file handling through the front panel of the receiver

If the receiver is set to the following mode: The suggested application filename is:

Base

BASE01

Heading

HDG01

Moving Base

MB01

Rover

ROV01

Is AutoBase off?

Follow the usual
AutoBase process.

Active Appfile

<current app filename> *

Do you want to do further

Appfile handling?

Press

L 

to complete

system setup.

Press side arrow.

START

appfile

will flash. Scroll

through START, SAVE, DELETE.
Press

to make decision.

Scroll through application
files in the receiver. Make
decision by pressing

Setup menu.

appears on the System

The following message

Yes

Display shows the active
application file. Press

Note – The '*' after the <current app filename> signifies it is the application file currently in use by the receiver.

to complete.

Yes