Справочник Пользователя для Kenwood Electronics Powered Subwoofer SW-21HT

6     

SW-21HT

1 POWER switch

Switches the power ON and OFF.

2 SLEEP indicator

Lights green when the unit is put to the sleep 

mode by the auto power save function.

3 WAKE UP switch

When the unit is put to the sleep mode (which 

is indicated by the green lighting of the SLEEP 

indicator) by the auto power save function, 

pressing this switch cancels the sleep mode.

4 VOLUME knob

Adjusts the volume level of the output of 

the Subwoofer. Rotating the knob clockwise 

increases the volume level, and rotating the knob 

counterclockwise decreases the volume level.

5 AUTO POWER SAVE switch

The auto power save function is activated when 

this switch is ON. With this function, the unit enters 

the sleep mode when no signal has been input for 

30 minutes and the SLEEP indicator lights green.

The sleep mode can be canceled by pressing the 

WAKE UP switch.

6 LINE INPUT jack (RCA-type pin-plug)

This jack is used to connect the subwoofer Pre-Out 

jack of the amplifi er.

7 Power cord connector

Connect to Power cord.

An excessive input level to the Subwoofer may 
impair the sound quality or damage the unit. 
Careful attention should therefore be paid to the 
following precautions.

•  Do not increase the output of the amplifi er to a high 

level while the low-frequency level is enhanced by 
the amplifi er’s tone control or loudness control.

•  When operating the amplifi er switches or when 

placing the stylus on an analog record, set the 
amplifi er volume to its minimum level.