Листовка для Pelco Spectra IV SE27X SD427-PRE1-X
Модели
SD427-PRE1-X
PRODUCT SPECIFICATION
camera solutions
C3421 / REVISED 12-21-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Pressurized Spectra
®
IV SE Series
BACK BOX AND LOWER DOME
Product Features
•
Pressurized to 8 psig (55 kPa)
•
Solid-State Sensors for Internal Temperature, Pressure, and
Dew Point
Dew Point
•
On-Demand Environmental Status Display for Internal Temperature,
Pressure, and Dew Point
Pressure, and Dew Point
•
On-Screen Alert Modes
•
On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor
Alert Settings
Alert Settings
•
Built-in Back Box Memory
•
Integrated Passive UTP Circuit
•
2 Auxiliary Outputs and 7 Alarm Inputs
•
Environmental Pendant Style Back Box
•
Stainless Steel Construction
•
Meets NEMA Type 6P and IP67 Standards
•
Compatible with 29X and 36X Spectra
®
IV SE Dome Drives
•
Built-in Power Line Surge and Limited Lightning Protection
•
Fiber Optic Feedthrough Models Available
Pelco’s Pressurized Spectra
®
IV SE Series dome system provides
ultimate protection of the camera optics and electronics from
moisture, corrosive gases, and airborne contaminants. Domes are
easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after
installation to stabilize the environment inside the system.
moisture, corrosive gases, and airborne contaminants. Domes are
easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after
installation to stabilize the environment inside the system.
Sensors strategically placed in the dome system send an “Alert”
message when changes in internal pressure, temperature, or dew
point are beyond factory-set acceptable limits. The sensors also allow
for instant on-screen display of internal temperature, pressure, and
dew point.
message when changes in internal pressure, temperature, or dew
point are beyond factory-set acceptable limits. The sensors also allow
for instant on-screen display of internal temperature, pressure, and
dew point.
The components of the Pressurized Spectra IV SE Series include
an environmental pendant style back box and a lower dome designed
for optimum optical clarity. All stainless steel construction provides
added protection in harsh environments.
an environmental pendant style back box and a lower dome designed
for optimum optical clarity. All stainless steel construction provides
added protection in harsh environments.
The back box features a sun shroud, heater, and fan to maintain a
consistent operating environment. The back box also features built-in
back box memory, an integrated passive UTP circuit, two auxiliary
outputs, seven alarm inputs, and is compatible with all Spectra IV SE
Series dome drives.
consistent operating environment. The back box also features built-in
back box memory, an integrated passive UTP circuit, two auxiliary
outputs, seven alarm inputs, and is compatible with all Spectra IV SE
Series dome drives.
The lower dome features an innovative O-ring seal and a stainless
steel V-band to create a reliable pressure seal. The V-band has a
unique latching system with one captivated fastener making lower
dome installation easy. Accessible on the lower dome trim ring are a
Schrader valve for system purging and a pressure relief valve.
steel V-band to create a reliable pressure seal. The V-band has a
unique latching system with one captivated fastener making lower
dome installation easy. Accessible on the lower dome trim ring are a
Schrader valve for system purging and a pressure relief valve.
The Pressurized Spectra IV SE Series is supplied with a prewired
cable with mating connector. The cable includes all wires for system
functionality, including power, alarms, auxiliaries, coaxial video, UTP
video, and serial control.
cable with mating connector. The cable includes all wires for system
functionality, including power, alarms, auxiliaries, coaxial video, UTP
video, and serial control.
Also available are pressurized back box models with fiber optic
feedthrough that allow Pelco’s FS85011A and third-party fiber optic
transmitters to be installed inside the back box. These models include
either a 9/125 µm single-mode or 62.5/125 µm multimode fiber optic
cable with an ST-type connector.
feedthrough that allow Pelco’s FS85011A and third-party fiber optic
transmitters to be installed inside the back box. These models include
either a 9/125 µm single-mode or 62.5/125 µm multimode fiber optic
cable with an ST-type connector.
5.96 (15.1)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.
11.63
(29.5)
10.50 (26.7)