Справочник Пользователя для IBM Flex System V7000 Expansion Enclosure 4939H29
Модели
4939H29
8068ch13-Maintenance and Troubleshooting.fm
Draft Document for Review January 29, 2013 12:52 pm
570
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
13.13.2 Powering off the system
Follow the below procedure to power off the system.
1. Stop any hosts using the Flex System V7000 Storage Node.
2. Use the Flex System V7000 Storage Node management GUI to shut down the system, as
shown in Figure 13-46.
Figure 13-46 Shutting down the system from IBM Flex System V7000 GUI
Figure 13-47 Confirmation to start the shutdown process
13.13.3 Shutting down using IBM Flex System V7000 command-line interface
You can also shut down an IBM Flex System V7000 Storage Node by using the CLI and the
PuTTY utility. Run the stopcluster command to shut down the system:
PuTTY utility. Run the stopcluster command to shut down the system:
13.13.4 Powering off a node using the CMM
Use this procedure when it is necessary to power off the Flex System V7000 Storage Node
using the CMM. Make sure you select the correct node canister before proceeding. Power off
using the CMM. Make sure you select the correct node canister before proceeding. Power off
Attention: Ensure that you have stopped all FlashCopy mappings, Remote Copy
relationships, data migration operations, and forced deletions before continuing. Click
Yes to begin the shutdown process, as shown in Figure 13-47.
relationships, data migration operations, and forced deletions before continuing. Click
Yes to begin the shutdown process, as shown in Figure 13-47.