Информационное Руководство для Ideal Networks SignalTEKCable length meter, R156002
Модели
R156002
Data Cable
Transmission Tester
Proof of Performance
SignalTEK
CT
If you install or maintain data cabling, SignalTEK CT allows you to
generate PDF test reports that prove installed links run at Gigabit Ethernet
transmission rates.
For installers, this means having a cost-effective way to demonstrate that
the copper cabling was installed correctly and is capable of supporting
Ethernet applications. By proving real world performance, SignalTEK CT
confirms a professional job - reducing the risk of call backs.
SignalTEK CT also gives network owners the assurance that installed
cabling will support bandwidth hungry services like VoIP, IP CCTV and
video streaming following moves, adds and changes.
generate PDF test reports that prove installed links run at Gigabit Ethernet
transmission rates.
For installers, this means having a cost-effective way to demonstrate that
the copper cabling was installed correctly and is capable of supporting
Ethernet applications. By proving real world performance, SignalTEK CT
confirms a professional job - reducing the risk of call backs.
SignalTEK CT also gives network owners the assurance that installed
cabling will support bandwidth hungry services like VoIP, IP CCTV and
video streaming following moves, adds and changes.
Today’s challenge
The foundation of all Ethernet networks is the physical cabling. As networks
become faster and more complex they become more susceptible to disruption
from external interference as well as faulty cabling and or connectors. These
physical layer problems can cause a high number of server re-transmissions
from external interference as well as faulty cabling and or connectors. These
physical layer problems can cause a high number of server re-transmissions
resulting in network drop-out or slow connection speeds.
If network performance issues are to be avoided, today’s installers and technicians
need test equipment that not only verifies correct wiring but also confirms a link’s
ability to transmit data at full rate.
need test equipment that not only verifies correct wiring but also confirms a link’s
ability to transmit data at full rate.
Tomorrow‘s solution
Uniquely SignalTEK CT proves a link’s ability to support Gigabit applications
by performing two primary tests;
by performing two primary tests;
data transmission and wiremap testing.
With a single press of the Autotest button, SignalTEK CT transmits 823,452 data
frames between the two handsets and reports any transmission errors against
performance criteria laid down by the IEEE 802.3ab Gigabit Ethernet Standard.
performance criteria laid down by the IEEE 802.3ab Gigabit Ethernet Standard.
It takes only 1 bit of data to get corrupted or lost to give rise to a transmission
test failure.
test failure.
Autotest also measures cable length and checks for wiring faults such as crossed
pairs, opens, shorts and split pairs.
Simple pass/fail results are displayed once the Autotest is complete which can be
automatically saved for later review or download.
automatically saved for later review or download.
Autotest from remote unit for
one person testing
Easy transfer of test results
using USB memory stick
Replaceable RJ45 contacts