Справочник Пользователя для Benning IT 120 B 044102
![Benning](https://files.manualsbrain.com/attachments/2c6ac7cf379f61138af1e1f7a2711d87127cf48a/common/fit/150/50/0e125d4eb29c2f02050a306b8bcb2f3c8bc501b32f738eedf660cc9a30a0/brand_logo.gif)
Модели
044102
18
Resistance of auxiliary earth electrode and probe too
high.
high.
4.1.4 Result field
Measurement passed.
Measurement failed.
Measurement is aborted. Check the conditions at the in-
put terminal.
put terminal.
4.1.5 Other messages
Instrument settings and measurement parameters/limits
are set to initial (factory) values. For more information re-
fer to chapter 4.5.4 Recalling original settings.
are set to initial (factory) values. For more information re-
fer to chapter 4.5.4 Recalling original settings.
Probe
LUXmeter probe is turned off or disconnected from the
instrument.
instrument.
First measurement
The first stored measurement result is displayed.
Last measurement
The last stored measurement result is displayed.
Memory full
All memory locations are occupied.
Already saved
Measurement results already saved.
CHECK SUM ERROR
Important memory contents lost or damaged. Contact
your distributor or manufacturer for further information.
your distributor or manufacturer for further information.
4.1.6 Sound warnings
Shortest sound
Pressed key deactivated.
Sub-function is not available.
Sub-function is not available.
Short sound
Pressed key activated.
Measurement has been started after pressing the
TEST key. Consider any displayed warnings during
measurement.
Measurement has been started after pressing the
TEST key. Consider any displayed warnings during
measurement.
Long sound
Measurement prohibited. Consider any displayed war-
nings and check online voltage/terminal monitor.
nings and check online voltage/terminal monitor.
Periodic sound
Warning! Phase voltage on the PE terminal! Stop all the
measurements immediately and eliminate the fault before
proceeding with any activity.
measurements immediately and eliminate the fault before
proceeding with any activity.