Справочник Пользователя для Gmw TG UNI 1VDE-tester DIN VDE 0701/ 0702 61000 00100
Модели
61000 00100
The test results can be saved on a PC with the supplied PC programme or
printed from there in the form of a test log. To do this, make the USB
connection between the tester and the PC (USB cable supplied with the
tester) or transfer the saved data from the MMC memory card to the PC.
printed from there in the form of a test log. To do this, make the USB
connection between the tester and the PC (USB cable supplied with the
tester) or transfer the saved data from the MMC memory card to the PC.
Procedure on the PC – see the operating instructions for the supplied PC
software.
software.
Confirm the entry with the [OK] button – the display changes (Fig. 60) and
shows the ID number, the name of the inspector and the date. The data is
saved in the memory with the [Save] button.
A confirmation message appears (Fig. 61) – continue with the [End] button.
shows the ID number, the name of the inspector and the date. The data is
saved in the memory with the [Save] button.
A confirmation message appears (Fig. 61) – continue with the [End] button.
With the entry of an already used ID number, the data is “attached“
as a new test to this ID number
as a new test to this ID number
38
Operating manual for the TG uni 1 appliance tester
Conducting tests in accordance with VDE 0701 and 0702 - PC III
Conducting tests in accordance with VDE 0701 and 0702 - PC III
Fig. 60
Fig. 61
Fig. 62
f
f
After the saving process, the display changes to the ‘Settings for measuring’
menu – the tester is ready for the next test (Fig. 62).
menu – the tester is ready for the next test (Fig. 62).
&
&
&
&
&