Техническая Спецификация для Rgb Lasersysteme QWAVE UV Lux-Meter, illumination measuring device, Brightness meter, DSA491006
Модели
DSA491006
Installation
3
2 Installation
2.1 PC Setup
Installing the Qwave spectrometer is very straightforward. You just need to install the
software and then connect the device to a USB port.
software and then connect the device to a USB port.
Please install the software by double-clicking on the WavesSetup.exe file on the CD-
ROM. The setup package then installs the application software and the device driver. For
the operating system to properly recognize the device, it’s best if you install the software
first before attaching the device.
ROM. The setup package then installs the application software and the device driver. For
the operating system to properly recognize the device, it’s best if you install the software
first before attaching the device.
The software is tested with 32 and 64 bit versions of Windows 7, Vista and XP. It requires
the Microsoft .NET framework version 3.5, which is already installed on most PCs. If this
framework is not installed, the setup package asks you to install it first. You can find the
setup file for the .NET framework on the CD or download it from Microsoft’s website.
Please note that you need version 3.5 of the framework. Version 4.0 does not include
version 3.5.
the Microsoft .NET framework version 3.5, which is already installed on most PCs. If this
framework is not installed, the setup package asks you to install it first. You can find the
setup file for the .NET framework on the CD or download it from Microsoft’s website.
Please note that you need version 3.5 of the framework. Version 4.0 does not include
version 3.5.
You can install the software on as many computers as you like. For example, you may
want to install it in the lab for measurements and in your office for further spectrum
analysis. If you don’t have the CD-ROM at hand, you can also download the software from
our website.
want to install it in the lab for measurements and in your office for further spectrum
analysis. If you don’t have the CD-ROM at hand, you can also download the software from
our website.
The device driver for the Qwave spectrometer is not fully certified yet. If Windows
displays a warning, please choose to install the driver anyway. (If you received the
software on CD-ROM with your spectrometer or downloaded it directly from our website
www.rgb-laser.com, you can be assured that is does not contain any malicious software.)
displays a warning, please choose to install the driver anyway. (If you received the
software on CD-ROM with your spectrometer or downloaded it directly from our website
www.rgb-laser.com, you can be assured that is does not contain any malicious software.)
After the software is installed, please connect your Qwave spectrometer to a USB 2.0 port
on the computer. You can use the provided USB cable or almost any other Mini-USB
cable. The USB port needs to supply an electrical current of 500 mA, so you need to
either connect the spectrometer directly to your computer or to an externally powered
USB hub. A flashing red LED on the device indicated that the port does not supply
enough power.
on the computer. You can use the provided USB cable or almost any other Mini-USB
cable. The USB port needs to supply an electrical current of 500 mA, so you need to
either connect the spectrometer directly to your computer or to an externally powered
USB hub. A flashing red LED on the device indicated that the port does not supply
enough power.
When you start the Waves software, it automatically searches for Qwave spectrometers
and, if it finds one, initializes the device. If you attached it just before, it may take a few
seconds before the spectrometer is properly recognized by the operating system. The
initialization takes a couple of seconds during which the software loads the calibration
data from the device.
and, if it finds one, initializes the device. If you attached it just before, it may take a few
seconds before the spectrometer is properly recognized by the operating system. The
initialization takes a couple of seconds during which the software loads the calibration
data from the device.
If the software finds no or several spectrometers while starting, it displays a dialog
window from which you can choose a device or decide to use a “Simulated
spectrometer” instead. This simulated spectrometer can be used to evaluate the software
window from which you can choose a device or decide to use a “Simulated
spectrometer” instead. This simulated spectrometer can be used to evaluate the software