Техническая Спецификация для Philips Electric shaver HQ6927 HQ6927/16

Модели
HQ6927/16
Скачать
Страница из 9
Introduction
Congratulations on your purchase and welcome 
to Philips! To fully benefit from the support that 
Philips offers, register your product at www.philips.
com/welcome.
The Super Lift & Cut system ensures a close and 
easy shave every day. For the best result, move the 
shaving heads over your skin in both straight and 
circular movements.
Replace the shaving heads every two years for 
optimal shaving results.
General description (Fig. 1)
A  Protection cap
B  Shaving unit
C  Trimmer (HQ6940 only)
D  Trimmer slide (HQ6940 only) 
E  Shaver on/off slide
F  Cleaning brush
G  Mains cord
H  Appliance plug
Important
Read this user manual carefully before you use the 
appliance and save it for future reference.
Danger
Keep the shaver and the mains cord 
dry (Fig. 2).
Warning
This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they 
have been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety.
Children should be supervised to ensure that 
they do not play with the appliance.
Do not use the shaver or the mains cord if it is 
damaged. 
If the mains cord is damaged, always have it 
replaced with one of the original type in order 
to avoid a hazard.
Caution
Always put the protection cap on the shaver 
to protect the shaving heads when you are 
travelling (Fig. 3).
Only use the mains cord supplied.
Store the appliance at a temperature between 
5°C and 35°C. 
This appliance is not washable. Never immerse 
the appliance in water, nor rinse it under the 
tap.
Compliance with standards
This Philips appliance complies with all standards 
regarding electromagnetic fields (EMF). If handled 
properly and according to the instructions in this 
user manual, the appliance is safe to use based on 
scientific evidence available today.
General
The appliance is equipped with an automatic 
voltage selector and is suitable for mains 
voltages from 100 to 240 volts.
Using the appliance
Shaving
1
Put the appliance plug in the shaver (Fig. 4).
2
Put the mains plug in the wall socket.
3
Push the on/off slide upwards to switch on
the shaver.
4
Move the shaving heads over your skin. Make
both straight and circular movements (Fig. 5).
-
-
-
-
-
-
-
-
-
ENGLISH
Shaving on a dry face gives the best results.
Your skin may need 2 or 3 weeks to get 
accustomed to the Philips shaving system.
5
Push the on/off slide downwards to switch off
the shaver.
6
Put the protection cap on the shaver
every time you have used it, to prevent
damage (Fig. 3).
Trimming (HQ6940 only)
You can use the trimmer to trim your sideburns 
and moustache.
1
Push the slide upwards to open the
trimmer (Fig. 6).
The trimmer can be activated while the motor is 
running.
Cleaning and maintenance
Regular cleaning guarantees better shaving 
performance.
This appliance is not washable. Never immerse
the appliance in water, nor rinse it under the tap.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
For easy and optimal cleaning, Philips Shaving 
Head Cleaning Spray (type no. HQ110) 
is available. Ask your Philips dealer for 
information.
Note: Philips Shaving Head Cleaning Spray may not 
be available in all countries. Contact the Customer 
Care Centre in your country about the availability of 
this accessory.
You can also clean the shaver in the following way:
Every week: shaving unit and hair 
chamber
1
Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance
plug out of the shaver.
2
Clean the top of the appliance first. Use the
cleaning brush supplied (Fig. 7).
3
Press the release button (1) and remove the
shaving unit (2) (Fig. 8).
4
Clean the inside of the shaving unit and the
hair chamber with the cleaning brush (Fig. 9).
5
Put the shaving unit back onto the
shaver (Fig. 10).
Every two months: shaving heads
1
Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance
plug out of the shaver.
2
Press the release button (1) and remove the
shaving unit (2) (Fig. 8).
3
Turn the wheel anticlockwise (1) and remove
the retaining frame (2) (Fig. 11).
4
Remove the cutters and guards and
clean them with the cleaning brush
supplied (Fig. 12).
Note: Do not clean more than one cutter and 
guard at a time, since they are all matching sets. 
If you accidentally mix up the cutters and guards, 
it may take several weeks before optimal shaving 
performance is restored.
5
Clean the cutter with the short-bristled side
of the cleaning brush (Fig. 13).
Brush carefully in the direction of the arrow.
6
Brush the guard (Fig. 14).
-
7
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, push it down (1) and turn the
wheel clockwise (2) (Fig. 15).
8
Put the shaving unit back onto the shaver.
Extra thorough cleaning
For extra thorough cleaning, put the shaving 
heads in a degreasing liquid (e.g. alcohol) every six 
months. To remove the shaving heads, follow steps 
1 to 4 described above. After cleaning, lubricate 
the central point on the inside of the guards with a 
drop of sewing machine oil to prevent wear of the 
shaving heads.
Trimmer (HQ6940 only)
Clean the trimmer every time you have used it.
1
Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance
plug out of the shaver.
2
Clean the trimmer with the cleaning brush
supplied (Fig. 16).
Tip: Lubricate the trimmer teeth with a drop of 
sewing machine oil every six months (Fig. 17).
Storage 
1
Put the protection cap on the shaver to
prevent damage (Fig. 3).
Replacement
Replace the shaving heads every two years for 
optimal shaving results.
Replace damaged or worn shaving heads with 
HQ55 Philips Shaving Heads only.
1
Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance
plug out of the shaver.
2
Press the release button (1) and remove the
shaving unit (2) (Fig. 18).
3
Turn the wheel anticlockwise (1) and remove
the retaining frame (2) (Fig. 11).
4
Remove the shaving heads and place new
ones in the shaving unit (Fig. 12).
5
Put the retaining frame back into the shaving
unit, push it down (1) and turn the wheel
clockwise (2) (Fig. 15).
6
Put the shaving unit back onto the shaver.
Accessories
The following accessories are available:
HQ55 Philips Shaving Heads. 
HQ110 Philips Shaving Head Cleaning Spray 
(not available in China).
Environment
Do not throw away the appliance with the 
normal household waste at the end of its life, 
but hand it in at an official collection point for 
recycling. By doing this, you help to preserve 
the environment (Fig. 19).
Guarantee & service
If you need service or  information or if you have 
a problem, please visit the Philips website at www.
philips.com or contact the Philips Consumer Care 
Centre in your country (you find its phone number 
in the worldwide guarantee leaflet). If there is no 
Consumer Care Centre in your country, go to your 
local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are 
not covered by the terms of the international 
guarantee because they are subject to wear.
-
-
-
4222.002.5056.1
2/9