Справочник Пользователя для ConiuGo 700100107 EasyGuard II 700100107
Модели
700100107
11
Revision 9.0
GSM Alarm & Telemetry systems
Please note: The accumulator must not be discarded or thrown
into fire. Waste disposal advice should be followed.
8. Basic Instructions
To simplify the settings of the system we would explain the important functions of the
alarm system itself:
Events (Actions which are recognized by the alarm system)
(with sensors on the inputs or about internal actions in the system)
Possible Events: Door-, Window contacts, motiontracker, smoke-, fire sensor, re-
lais, temperature / preassure / air damp meassurements, etc.
Actions (functions which are triggered by the alarm system itself)
(triggered about internal functions and relais of the alarm system)
Possible actions: Sending of SMS, switching relais, send status reports, etc.
Connection settings (combines an event with an action)
(gives the possibility to combine actions with upcoming events)
Possible connections (this depends on the apllication of the user and the used
sensors and actors. Here you have a possible application:
1.) If a window was opened there will be opened also a contact (Event) and will be
recognized over the digital input. Over the connection settings the user has definded
that an SMS will send when the contact will be opened (Action).
The events will be connected with the events over the connec-
tion settings.
The system can perform a repertory of actions. This can be sending an SMS,
switching on/off a heater or anything else. By a special combination of input set-
tings (reaction of a motion tracker, a temperature becoming higher or lower than
usual, etc.) the acitons are triggered. To determine these actions the combination
tables are used: