Техническая Спецификация для Unold 86106

18

When you lightly 

shake the appliance 

you will hear a noi-

se coming from the 

interior of the appli-

ance. This is caused 

by the tilt protection technology used; 

there is no defect in the appliance!

The tilt protection switches the appli-

ance off immediately, as soon as the 

appliance tilts to a position where safe 

operation is in jeopardy.

1.  Maintain an adequate safety dis-

tance (at least 1 meter) to other 

objects, such as furniture, cur-

tains, etc.

2.  Only place the appliance in opera-

tion in a vertical position.

3.  Ensure that air can flow in and 

out unhindered - do not, under 

any circumstances, cover the air 

inlets of the appliance.

4.  Only place the appliance on a 

solid and level substrate. Do not 

place the appliance on soft sur-

faces (sofa, bed) because the 

appliance can tip over.

5.  In addition, ensure that the appli-

ance is not set up on deep-pile 

carpets or in dusty environments.

6.  For safety reasons, the appliance 

must not be used in the vicinity 

of sinks, bathtubs, or water con-

nections.

7.  Never place the appliance directly 

under an electrical outlet, and 

ensure that the power socket used 

is easily accessible at all times.

8.  Check whether the power cord is 

routed in such a manner that no 

one can stumble over it.

9.  The power cord should not touch 

any housing parts, this could 

cause the cable to melt.

1.  Remove all packaging materials 

and any transport safeguards.

2.  Check whether all listed acces-

sory parts are present and intact. 

3.  Comply with all instructions that 

are specified in the chapter, “The 

ideal location”, and find a suita-

ble location.

4.  When you use the appliance for 

the first time, or if it has not been 

operated for an extended period 

of time, a slight odour can occur. 

1.  Comply with all safety instruc-

tions and safety regulations.

2.  Ensure that you have selected a 

safe location. 

3.  Plug the mains plug of the appli-

ance into an electrical outlet 

(230 V ~ 50 Hz).

4.  Select the desired function on the 

rotary function regulator:

- Level “I” for less heat  

 

(approx. 1,000 watt)

- Level “II” for more head    

(approx. 2,000 watt)