Техническая Спецификация для Voltcraft CO-100 Room Air Meter CO-100
Модели
CO-100
39
i) Resetting the CO
2
Meter to Factory Settings
This function resets the CO
2
meter to factory settings.
¼
Not only the threshold value settings, but also basic calibration is reset.
All 48 data memory slots (see chapter 9 g) are also deleted.
Proceed as follows:
• Briefly press the „MODE“ button repeatedly (from the normal operating mode) until
„RcFS“ flashes on the display („RcFS“ = Recover the Factory Settings“).
• Briefly press the button „ENTER“; the top display line shows „NO“.
• Select between „NO“ and „YES“ using the arrow buttons „“ or „“.
„NO“ = do not reset
„YES“ = Reset to default settings
• Briefly press the „ENTER“ button.
If you selected „NO“, the CO
2
meter returns to normal display without resetting factory
settings.
Selecting „YES“ resets all settings to factory settings and deletes all 48 data memory
slots. Then the CO
slots. Then the CO
2
meter returns to normal display.