Справочник Пользователя для Ideal Networks SignalTEK IICable length meter, R156000
Модели
R156000
156810 Iss 2
SignalTEK II
Page 22
User Guide
With an Active Remote or a SignalTEK II Remote Unit termination the possible faults detected are:
Fig 26 Open circuit by pin
Fig 27 Short circuit by pin
Fig 28 Crossed pairs
Fig 29 Split pairs
Fig 30 Bridged shorts
Fig 31 Remote shorts
As with the result of the Crossover fault shown in Fig 20 and Fig 21, all wiremap test results are displayed
as a graphic that includes the FAULT icon. When the icon is selected, the faults are presented as a list.
as a graphic that includes the FAULT icon. When the icon is selected, the faults are presented as a list.
The indications that follow appear on the Active Remote device:
Flashing green LED
– Test Passed.
Flashing red LED
– Test Failed.
Amber LED
– DC voltage greater than 12 Volts detected – cannot perform test.