Техническая Спецификация для Atmel ATSTK600 500 Starter Kit and Development System. ATSTK600 ATSTK600
Модели
ATSTK600
AVR079
17
8133A-AVR-04/08
Table 5-10. Mode byte description.
Pagesize \ bit
3
2
1
256
0 0 0
2
0 0 1
4
0 1 0
8
0 1 1
16
1 0 0
32
1 0 1
64
1 1 0
128
1 1 1
NOTE: that only Bit 0-3 are set in the XML file, cause Bit 6-7 are not static and must
be controlled by the PC Frontend.
be controlled by the PC Frontend.
Table 5-11. Answer format /(same for all results).
Field Size
Values
Description
Answer ID
1 byte
CMD_PROGRAM_FLASH_PP
Answer id
Status
1 byte
See table below
A Result Value indicating the result of the
operation
operation
Table 5-12. Valid Result Values for the answer to this command.
Value Description
STATUS_CMD_OK Operation
succeeded
STATUS_RDY_BSY_TOUT
No response from target device within specified
timeframe
timeframe
5.5 CMD_READ_FLASH_PP
This command will read data from the FLASH memory of the target device if it
succeeds. For devices with the FLASH organized in pages, the data address and size
used with this command must confirm to that of the device. I.e. one ReadFlash
command is used to read one page in the target device.
succeeds. For devices with the FLASH organized in pages, the data address and size
used with this command must confirm to that of the device. I.e. one ReadFlash
command is used to read one page in the target device.
XML PATH: /AVRPART/ICE_SETTINGS/STK600/PpReadFlash/
Table 5-13. Command format.
Field Size
Values
Description
Command ID
1 byte
CMD_READ_FLASH_PP
Command id
Nmb bytes (MSB)
1 byte
Total number of bytes to read (MSB)
Nmb bytes (LSB)
1 byte
Total number of bytes to read (LSB)
Table 5-14. Answer format if the command is executed.
Field Size
Values
Description
Answer ID
1 byte
CMD_READ_FLASH_PP
Answer id