Техническая Спецификация для Reely ARF 911 mm PC-21





Before you start assembly, check the parts for the scope of delivery of your model. For photo-technical reasons, small parts like screws are not
illustrated. Please observe the information provided in the individual chapters.

1 Fuselage with cabin hood

2 Wing

3 Elevator unit

4 Fin

5 Propeller set

6 Rudder unit

The following components not included in delivery are required for assembly and operation:

Soldering gun, cutter knife, screwdriver, 5-minute epoxy resin,  possibly thixotropic agents (micro-balloon or cotton flock) for thickening the resin, super glue and
sand paper.

Observe the safety information of the respective manufacturer when using glues and work with glues in well-ventilated rooms only.

To fly the model, a suitable remote control with at least 5 channels, a suitable 4-cell LiPo flight battery with approx. 2200 mAh and the corresponding plug
connectors are required.

For a model like the “PC-21”, we recommend use of a state-of-the-art 2.4 GHz computer remote control system with mixing functions. In this case, you have the
option of putting every servo to a separate receiver output to thus set every servo individually.

See our catalogues or our website at www.conrad.com for tried and tested accessories.