Техническая Спецификация для Reely ARF 911 mm PC-21

• Always switch on the transmitter first. Then the flight battery of the model may be connected. Otherwise, the electric model plane may show unpredictable

responses and the rotor may start unintentionally!

• Always check if the rotor is correctly and securely installed before operating the product.

• Make sure that no objects or body parts are in the range or the suction area of the rotor while it is rotating.

• Do not take any risks when operating the product! Your own safety and that of your environment is solely down to you being responsible when dealing with the

model.

• Improper operation may cause serious injury and property damage! Therefore make sure to keep a sufficiently safe distance to persons, animals or objects

during operation.

• Select a suitable area to operate your model plane.

• Fly your model only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can cause incorrect responses.

• Do not direct your model towards spectators or towards yourself.

• Never point the aerial of the transmitter directly onto the model. This significantly impairs signal transmission to the model.

• Motor, flight control system and flight battery may heat up during operation of the model. For this reason, wait for 5 to 10 minutes before recharging or replacing

the flight battery. The drive motor must have cooled down to ambient temperature.

• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the flight battery first or switch off the model. It is

only after this that the remote control may be turned off.

• In case of a defect or a malfunction, remove the problem before using the model again.

• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.

• Do not direct your model towards spectators or towards yourself.

• Motor, flight control system and flight battery may heat up during operation of the model. For this reason, wait for 5 to 10 minutes before recharging or replacing

the flight battery. The drive motor must have cooled down to ambient temperature.

• Never switch off the remote control (transmitter) while the model is in use. Always switch off the model first after landing. It is only after this that the remote

control may be turned off.

• In case of a defect or a malfunction, remove the problem before using the model again.

• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.