Справочник Пользователя для Reely Brushed 1:10 RC model car Electric Truggy QCO10E4W096EV61R01

• Let go of the throttle/brake lever on the transmitter so that it goes into neutral position, and let the vehicle run out.

• Once the vehicle is stationary, remove the car body and switch off the speed controller (switch position at the vehicle

see chapter 8. e).

Never touch the wheels or the drive mechanism, and make sure you do not move the throttle/brake lever
at the transmitter!

• Disconnect the drive battery from the speed controller. Disconnect the plug connection completely.

• It is only now that the transmitter may be turned off.

The motor, the speed controller and the drive battery get hot during operation! Do not touch these parts
immediately after operation. Danger of burns!