Техническая Спецификация для Reely RC model sailing boat ARR 800 mm Tri800
Модели
Tri800
34
g) Mounting the Head Sail
Install the head sail to the boat deck with rope and hook
as shown in figure 8, item 2.
as shown in figure 8, item 2.
Attach the control rope to the „boom“ of the headsail
as shown in figure 8, item 1. This controls the angle of
attack of the sail (as in the mainsail).
as shown in figure 8, item 1. This controls the angle of
attack of the sail (as in the mainsail).
h) Assembly of Mainsail and Head Sail to the Mast
Attach the tensioning rope of the mainsail to the „mast
top“ of the mast as shown in figure 9, item 1.
top“ of the mast as shown in figure 9, item 1.
Attach the tensioning rope of the head sail to the „mast
top“ of the mast as shown in figure 9, item 2.
top“ of the mast as shown in figure 9, item 2.
After the mast is tensioned (see the following chapter
„Tensioning the Mast“), the tensioners of the mainsail
(3) and head sail (4) have to pull the sails up tensely.
„Tensioning the Mast“), the tensioners of the mainsail
(3) and head sail (4) have to pull the sails up tensely.
Figure 8
Figure 9