Техническая Спецификация для Buffalo TeraStation 3400r 12TB TS3400R1204-EU

153

configuration before you apply the settings. If the drive configuration is different, you may get unexpected results.
The following settings are not saved or restored:

Category

Settings

File sharing
USB drive and memory cartridge shared folder 

information

All settings in “Drives”

All settings in “RAID” - “Options” - “RAID Array Settings”
All settings in “LVM”
All settings in “iSCSI”
USB drive and memory cartridge information

Network

All settings in “IP Address”
All settings in “Port Trunking”

Backup

All settings in “Failover”

Management

All settings in “Name”
All settings in “UPS Sync”
All settings in “SSL”
Display language in Settings

Insert a USB memory device into a USB port on the TeraStation.

Notes: 
•  Use a USB 2.0 port. If your TeraStation has both USB 3.0 and USB 2.0 ports, make sure that you use one of the USB 

2.0 ports.

•  The USB memory device should have a capacity of at least 1 GB.
•  Any data stored on the USB memory device will be deleted. 

In Settings, click Management

Click the 

 icon to the right of “Restore/Erase”.

From “Target USB drive”, select the USB memory device that is connected to the USB 2.0 port of the TeraStation.

Select “Save settings to a USB drive”. Or, to create a USB memory device that resets the TeraStation administrator 
password to the default password, select “Create a special USB drive for password recovery”. Click Execute.