Buffalo TeraStation 3400r 12TB TS3400R1204-EU Ficha De Dados
Códigos do produto
TS3400R1204-EU
153
configuration before you apply the settings. If the drive configuration is different, you may get unexpected results.
The following settings are not saved or restored:
The following settings are not saved or restored:
Category
Settings
File sharing
USB drive and memory cartridge shared folder
USB drive and memory cartridge shared folder
information
All settings in “Drives”
All settings in “RAID” - “Options” - “RAID Array Settings”
All settings in “LVM”
All settings in “iSCSI”
USB drive and memory cartridge information
All settings in “LVM”
All settings in “iSCSI”
USB drive and memory cartridge information
Network
All settings in “IP Address”
All settings in “Port Trunking”
All settings in “Port Trunking”
Backup
All settings in “Failover”
Management
All settings in “Name”
All settings in “UPS Sync”
All settings in “SSL”
Display language in Settings
All settings in “UPS Sync”
All settings in “SSL”
Display language in Settings
Saving Settings
1
1
Insert a USB memory device into a USB port on the TeraStation.
Notes:
• Use a USB 2.0 port. If your TeraStation has both USB 3.0 and USB 2.0 ports, make sure that you use one of the USB
• Use a USB 2.0 port. If your TeraStation has both USB 3.0 and USB 2.0 ports, make sure that you use one of the USB
2.0 ports.
• The USB memory device should have a capacity of at least 1 GB.
• Any data stored on the USB memory device will be deleted.
• Any data stored on the USB memory device will be deleted.
2
In Settings, click Management
3
Click the
icon to the right of “Restore/Erase”.
4
From “Target USB drive”, select the USB memory device that is connected to the USB 2.0 port of the TeraStation.
5
Select “Save settings to a USB drive”. Or, to create a USB memory device that resets the TeraStation administrator
password to the default password, select “Create a special USB drive for password recovery”. Click Execute.
password to the default password, select “Create a special USB drive for password recovery”. Click Execute.