Справочное Руководство для TP-LINK TL-SG2008

 

134

 

Enable the IGMP Snooping function and modify Router Port Time as 300 

seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the Leave 

time as 15 seconds for VLAN 1-2: 

TL-SG2008(config)# ip igmp snooping vlan-config 1-3 rtime 300 

TL-SG2008(config)# ip igmp snooping vlan-config 1-3 mtime 200 

TL-SG2008(config)# ip igmp snooping vlan-config 1-2 ltime 15 

Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and 

configure the forward port as port 1/0/1-3: 

TL-SG2008(config)# ip igmp snooping vlan-config 2 static 225.0.0.1 

interface gigabitEthernet 1/0/1-3 

The ip igmp snooping multi-vlan-config command is used to create Multicast 

VLAN. To delete the corresponding Multicast VLAN, please use no ip igmp 

snooping multi-vlan-config command. 

ip igmp snooping multi-vlan-config [ vlan-id  ] [ rtime  router-time  | mtime 

member-time | ltime leave-time | rport interface gigabitEthernet port ] 

vid —— The ID of the VLAN desired to modify configuration, ranging from 2 to 

4094. 

router-time —— Router Port Time. Within this time, if the switch does not 

receive IGMP query message from the router port, it will consider this port is not 

a router port any more. Router Port Time ranges from 60 to 600 in seconds. By 

default, it is 300. 

member-time —— Member Port Time. Within this time, if the switch does not 

receive IGMP report message from the member port, it will consider this port is 

not a member port any more. Member Port Time ranges from 60 to 600 in 

seconds. By default, it is 260.