Справочное Руководство для TP-LINK TL-SG2008

 

135

 

leave-time —— Leave Time, which is the interval between the switch receiving 

a leave message from a host and the switch removing the host from the 

multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. 

port —— The Ethernet port number. 

Global Configuration Mode 

Enable Multicast VLAN 3, and configure Router Port Time as 100 seconds, 

Member Port Time 100 seconds, Leave Time 3 seconds, and Static Router Port 

port 3: 

TL-SG2008(config)# ip igmp snooping multi-vlan-config 3 rtime 100 

TL-SG2008(config)# ip igmp snooping multi-vlan-config 3 mtime 100 

TL-SG2008(config)# ip igmp snooping multi-vlan-config 3 ltime 3 

TL-SG2008(config)# ip igmp snooping multi-vlan-config 3 rport interface 

gigabitEthernet 1/0/3 

The  ip igmp snooping filter add-id command is used to configure the 

multicast IP-range desired to filter. To delete the corresponding IP-range, please 

use  no ip igmp snooping filter add-id command. When IGMP Snooping is 

enabled, you can specified the multicast IP-range the ports can join so as to 

restrict users ordering multicast programs via configuring multicast filter rules. 

Multicast IP addresses ranges from 224.0.0.0 to 239.255.255.255. The range 

for receivers to join is from 224.0.1.0 to 239.255.255.255. 

ip igmp snooping filter addr-id addr-id list 

addr-id list —— The filtering address ID to be bound. 

Interface Configuration Mode (interface gigabitEthernet / interface range 

gigabitEthernet)