Справочное Руководство для TP-LINK TL-SG2008

 

154

 

Global Configuration Mode 

Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the 

event as description1, the type of event as log and the owner of the event as 

owner1: 

TL-SG2008(config)# rmon event 1-4 user user1 description description1 

type log owner owner1 

The  rmon alarm command is used to configure SNMP-RMON Alarm 

Management. To return to the default configuration, please use no rmon alarm 

command. Alarm Group is one of the commonly used RMON Groups. RMON 

alarm management allows monitoring the specific alarm variables. When the 

value of a monitored variable exceeds the threshold, an alarm event is 

generated, which triggers the switch to act in the set way. 

rmon alarm  index  interface gigabitEthernet  port [ alarm-variable  { drop | 

revbyte | revpkt | bpkt | mpkt | crc-lign | undersize | oversize | fragment | jabber | 

collision | 64 | 65-127 | 128-511 | 512-1023 | 1024-10240 }] [ s-type { absolute | 

delta} ] [ rising-threshold r-hold ] [ rising-event-index r-event ] [ falling-threshold 

f-hold  ] [ falling-event-index f-event ] [ a-type { rise | fall | all }] [ owner 

owner-name ] [ interval interval ] 

no rmon alarm index 

index —— The index number of the Alarm Management entry, ranging from 1 to 

12, in the format of 1-3,5. 

port —— The Ethernet port number. 

alarm-variable —— The alarm variable. By default, the option is “drop”. 

s-type —— Sample Type, which is the sampling method for the selected 

variable and comparing the value against the thresholds. There are two options, 

absolute and delta. Absolute indicates comparing the values directly with the 

thresholds at the end of the sampling interval. Delta indicates subtracting the