Справочное Руководство для TP-LINK TL-SG2008

 

155

 

last sampled value from the current value, and then comparing the difference in 

the values with the threshold. By default, the Sample Type is “absolute”. 

r-hold —— The rising counter value that triggers the Rising Threshold alarm, 

ranging from 1 to 65535. By default, it is 100. 

r-event —— Rise Event, which is the index of the corresponding event which will 

be triggered if the sampled value is larger than the Rising Threshold. It ranges 

from 1 to 12. 

f-hold —— The falling counter value that triggers the Falling Threshold alarm, 

ranging from 1 to 65535. By default, it is 100. 

f-event —— Fall Event, which is the index of the corresponding event which will 

be triggered if the sampled value is lower than the Falling Threshold. It ranges 

from 1 to 12. 

a-type —— Alarm Type, with rise, fall and all options. Rise indicates that the 

alarm event will be triggered when the sampled value exceeds the Rising 

Threshold, fall indicates that the alarm event will be triggered when the sampled 

value is under the Falling Threshold, and all indicates that the alarm event will 

be triggered either the sampled value exceeds the Rising Threshold or is under 

the Falling Threshold. By default, the Alarm Type is “all”. 

owner-name —— The owner of the entry, ranging from 1 to 16 characters. By 

default, it is “monitor”. 

interval —— The alarm interval time, ranging from 10 to 3600 in seconds. By 

default, it is 1800. 

Global Configuration Mode 

Configure the port of entries of 1,2 and 3 as port 2, the owners as owner1 and 

the alarm intervals as 100 seconds 

TL-SG2008(config)# rmon alarm 1-3 interface gigabitEthernet 1/0/2 owner 

owner1 interval 100 

The  show snmp-server command is used to display SNMP configuration 

globally.