Справочник Пользователя для Grandstream cordless VoIP-telephone DP715
Модели
DP715
Firmware version 1.0.0.21
DP715/DP710 User Manual
Page 29 of 52
If you want to register a handset to a new base, it has to be first de-registered from the existing
base by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then
repeat the above steps.
base by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then
repeat the above steps.
COMPLETING CALLS
There are three ways to complete a call:
A. Dial
1. Press .
3. Dial the number you want once you hear the dial tone.
4. The number appears on the display
wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly
(Use # as dial key” must be configured in web configuration).
5. To finish the call, press
or place the handset in the base unit or the charger unit.
B. Redial
1. Press .
2. The number you have most recently called appears in first place in the display.
3. Use or to search for the number you need.
4. Press
.
5. The number appears on the display
wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press
or replace the handset in the base unit or the charger unit.
C. Using the Phonebook
1. Press .
2. The first number in the phonebook appears on the display.
3. Press or to browse the phonebook.
4. Press .
5. The number appears on the display
wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press
or replace the handset in the base unit or the handset charger unit.
ANSWERING CALLS
The handset starts ringing during an incoming call; you have the following options to answer:
a. Press
to pick up the call.