Справочник Пользователя для Jeti RC console 2.4 GHz No. of channels: 16 80001571
Модели
80001571
computer radio control system
EN
1.
Number of Motors in the Model
This is where you select the number of motors in your model. It is
possible to select 0-4 motors. The number of transmitter control
outputs used to control the motors are automatically increased or
decreased according to number of motors that you select.
possible to select 0-4 motors. The number of transmitter control
outputs used to control the motors are automatically increased or
decreased according to number of motors that you select.
2.
Motor Type
Do the motors in your model only turn in one direction or are they
able to rotate in both directions?
able to rotate in both directions?
9.1.6 Basic Configuration-GENERAL
9.1.7 Assignment of functions
Based on your selected configuration a list of all flight functions will
be created with basic transmitter channel assignments.
The menu allows you to rename flight functions, assign a flight
function to any arbitratry transmitter stick, switch, knob or slider and
also allows you to setup additional flight function trims.
You can allow the software to automatically assign your flight
functions by pressing the „F2(Auto)“ button and then press the
„F5(Yes)“ button.
be created with basic transmitter channel assignments.
The menu allows you to rename flight functions, assign a flight
function to any arbitratry transmitter stick, switch, knob or slider and
also allows you to setup additional flight function trims.
You can allow the software to automatically assign your flight
functions by pressing the „F2(Auto)“ button and then press the
„F5(Yes)“ button.
1.
Flight function Renaming
By editing each „Function“ item you can rename a flight function
from its original name to any name that you choose.
from its original name to any name that you choose.
2.
Assignment of a Control Element to a Flight Function
By editing each „Control“ item you can assign any arbitrary stick,
switch, knob or slider to a given flight function. The proportional
channels 1 – 8 are marked P1–P8. The markings Sa-Sj designate
switches with the same designation as on the transmitter front
panel.
When you select one of these items you will enter the menu: „Select
control input“, see chapter 9.7. The assignments can easily be
verified by the graphic found beside the control element description
in the „Control “ section, which shows the actual setup of the
assigned control element.
switch, knob or slider to a given flight function. The proportional
channels 1 – 8 are marked P1–P8. The markings Sa-Sj designate
switches with the same designation as on the transmitter front
panel.
When you select one of these items you will enter the menu: „Select
control input“, see chapter 9.7. The assignments can easily be
verified by the graphic found beside the control element description
in the „Control “ section, which shows the actual setup of the
assigned control element.
3.
Choice of an Additional Trim
The transmitter allows you to also create a trim function for any
arbitrary flight function. By editing one of the „Trim“ items you can
assign an arbitrary control element (stick, switch, knob or slider) to
control the trim of the selected flight function. When you select one
arbitrary flight function. By editing one of the „Trim“ items you can
assign an arbitrary control element (stick, switch, knob or slider) to
control the trim of the selected flight function. When you select one
4.
4.
1
2
1
2
4
3
5
6
41