Справочник Пользователя для Jeti RC console 2.4 GHz No. of channels: 16 80001571
Модели
80001571
computer radio control system
EN
4.
4.
9.3.5 Sounds on Event (Sound Assignments)
You can assign an audio file to be played based on any transmitter
condition. This means than any music file stored in the transmitter
can be assigned to any switch, stick, knob, logical switch, alarm or
any other special function. Since you can also upload music files the
the DC/DS-16, you can fully customize how your transmitter
communicates with you. If multiple sound files are triggered at the
condition. This means than any music file stored in the transmitter
can be assigned to any switch, stick, knob, logical switch, alarm or
any other special function. Since you can also upload music files the
the DC/DS-16, you can fully customize how your transmitter
communicates with you. If multiple sound files are triggered at the
1.
Sound Switch Assignment
Select the “Switch” menu item and assign the switch that you want
to use to trigger the sound playback.
to use to trigger the sound playback.
2.
Select the Sound File
Select the “File” menu item and select the sound file that you want
assigned to the switch. The available audio files are stored in
Directory/Audio. This is important to remember if you upload your
own files.
assigned to the switch. The available audio files are stored in
Directory/Audio. This is important to remember if you upload your
own files.
3.
Sound Playback Delay
The playback of any sound, after activation, can be delayed by
editing the “Delay” menu item.
editing the “Delay” menu item.
4.
Sound Repeat
This menu item allows you to repeatedly play any sound after it has
been activated. This can be useful if your selected sound’s playing
time is short.
been activated. This can be useful if your selected sound’s playing
time is short.
Switch 1
Switch 2
The result of the operator
AND
OR
Multi
3.
Emulating a 3-Position Switch
You can use the logic function “Multi” to allow the logic switch to act
as a 3-position switch. The “Multi” logic function can combine the
output from two 2-position switches to create a logic switch with
three output conditions.
as a 3-position switch. The “Multi” logic function can combine the
output from two 2-position switches to create a logic switch with
three output conditions.
same time they will play at the same time and their sounds will
overlay each other.
overlay each other.
68