Справочник Пользователя для Leitz Icon 70010000

Several options are available for connecting the Leitz Icon printer to your computer.

• Connect the printer using USB
• Connect the printer using access point (Soft AP) mode
• Connect the printer using your wireless network

You can connect the printer directly to your computer using the included USB cable.

Plug the USB cable into the USB connector located on the back of the printer.

Plug the other end of the USB cable into an available USB port on your computer.
After a brief period, the printer is available in the printer list.

The printer can act as its own Access Point, or Soft AP, allowing a direct wireless connection between the printer and your 
computer. Using access point mode, you can wirelessly connect the printer to your computer without connecting to an 
existing wireless network. 

On your computer, search for available wireless networks.
For information on searching for wireless networks, see the documentation for your computer.

From the list of available networks, select ICON_xxyyzz, where xxyyzz is a combination of letters and numbers that 
uniquely identify your printer from other Icon printers in the area.

Click Join or Connect.

Once connected, start a web browser on your computer.

In the address bar, type 192.168.1.1 and then press Enter.

Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.

User name: Admin
Password: password

Changing the user name and password is recommended. See the Changing the User Name and Password on 
page 13 for information on changing the user name and password.

Click OK.
The Printer Setup Wizard starts.

Click Soft AP.
The printer is connected to your computer in access point mode and the Leitz Icon Control Panel is displayed.

Software installation must be complete before connecting the printer to your computer.

Software installation must be complete before connecting the printer to your computer.