Справочник Пользователя для Interphase Tech 4538

Signals printed in bold in 

 shall be routed to the corresponding PMC 

connector (used on 6435 RTM).

Signals printed in italics and underlined in 

 shall not be used on the 

carrier card. They should be routed to the corresponding PMC connector.

Signals followed by a (*) sign in 

 may be driven by the carrier card 

(No connection on the 6435 RTM). If switch mode is not supported by the carrier card, they 
should be routed to the corresponding PMC connector.

J5 A1 pin: TMRSNT: 6435 includes a 100 Ohm pull-up to 3.3 V (may be used by the carrier 
card to detect 6435 presence).

We recommend routing every other signal as indicated in 

 and 

 for future 

compatibility.

Customers who want to implement a 4538 "rear access" on configurations other than those 
described above will need to design their own line interfaces. For these customers, 
Interphase can provide additional information, such as schematics and a bill of material for 
these line interfaces.