Справочник Пользователя для Inline Warehouse IN60000
7
1995-1997 - INLINE, INC
PATHFINDER OPERATION MANUAL - REV2.1A May 19, 1997
PATH Mapping:
The PATH Mapping section gives you visual feedback of how the PATHFINDER is configured, that is
which inputs are connected to which outputs. Enter this sections by pressing the ENTER/SELECT button
when the screen reads as follows:
which inputs are connected to which outputs. Enter this sections by pressing the ENTER/SELECT button
when the screen reads as follows:
The following screen will appear (although it will appear different for your unit):
The screen above shows an example for an 8 output PATHFINDER. The example has the following input
and output configuration for Group 1:
and output configuration for Group 1:
•
Input 1 to Outputs 1 and 2
•
Input 4 to Output 5
•
Input 2 to Output 6
•
Input 0 to Outputs 3, 4, 7 & 8 (The outputs are blank)
Press the MENU button to exit this section.
You can view the PATH Mapping display while in the PATH Config menu. Press
and hold the MENU button, and then press the UP scroll button. The PATH
Mapping display will show the current group as long as you hold the UP scroll
button. This is very useful as a quick check of the switcher’s setup.
and hold the MENU button, and then press the UP scroll button. The PATH
Mapping display will show the current group as long as you hold the UP scroll
button. This is very useful as a quick check of the switcher’s setup.
Multiple Group Path Mapping:
If you have configured your PATHFINDER with multiple groups (see Board Configuration on page
13 for more details), you can view the Path Mapping information display for all groups. To view the
next group, push the NEXT button. You will see the Group# in the upper left corner change to the
next group. After the last group, it will go back to Group# 1.
13 for more details), you can view the Path Mapping information display for all groups. To view the
next group, push the NEXT button. You will see the Group# in the upper left corner change to the
next group. After the last group, it will go back to Group# 1.
A blank square designates no input
(i.e.: The output is blank)
(i.e.: The output is blank)
The number on top of the output
designates the input connected to
that output.
designates the input connected to
that output.
Group #
This row lists the outputs available.
Output row