Справочник Пользователя для Greyhound Lines 39981

TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR 
WORK AREA IS: 

Free of damp, wet or rainy conditions.

Free of children (never let them handle tools or machinery).

Well-lit.

Clean and uncluttered.

Before using any tool, any part that appears damaged should be carefully checked to determine that it will 
operate properly and perform its intended function.

Before operating your Log Splitter  check for damaged parts.   You should also:

 

 

 

 

Make sure all clamps, locks and bolts are tight.

 

 

 

 

Keep Guards in place and in working order.

Your Log Splitter requires some limited assembly.  Please refer to Figure 1, and to the 
Assembly Diagram on page 7 and Parts List on page 6 as needed for assembly and 
operation.  Unpack the Log Splitter at the place that you will be using it.  The Log Splitter 
is heavy, so be  certain to use proper lifting techniques when moving and placing the Log 
Splitter.

To complete the assembly, insert each Handle (A-16) into each Socket (A-25) as shown in 
Figure 1.    Your Log Splitter will then be ready to operate.