Справочник Пользователя для Brother S-7200A

 

 

S-7200A 

16

 

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in 
personal injury or damage to the machine. 

<Turning on the power>    
Press the ON power switch (1). 
The power indicator (2) will illuminate. 
 

The treadle and the operation panel will not operate for 
approximately four seconds after the power switch is 
turned on. 
After approximately 4 seconds, “iniT rPM” (speed 
initialization) or “iniT ALL” (full initialization) will be 
displayed on the operation panel. After “iniT rPM” or “iniT 
ALL” is displayed, the treadle can be operated. (The 
operation panel will change to the stitch number display.) 
This message will not appear the second and subsequent 
times that the power switch is turned on. 

 
 
 
 
<Test operation> 
1. Check that the machine sews at low speed when the 

treadle (3) is gently pressed to position (B).   

2. Then check that it sews at high speed when the treadle 

(3) is gently pressed to position (C). 

3. After pressing the treadle (3) forward, check that the 

needle is lowered to the top of the needle plate when the 
treadle (3) is returned to the neutral position (A). (when 
needle down stopping has been set.)   

4. If the treadle (3) is pressed to position (D), thread 

trimming is carried out and the needle then rises above 
the needle plate and stops. 

2114M

2115M

2116M

2117M