Справочник Пользователя для Brother S-7200A

 

 

S-7200A 

17

 

Turn off the power switch before installing the needle. 
The machine may operate if the treadle is depressed by mistake, which could result in injury. 

1. Turn the machine pulley to move the needle bar to its 

highest position. 

2.  Loosen the screw (1). 
3. Insert the needle (2) in a straight line as far as it will go, 

making sure that the long groove on the needle is at the 
left, and then securely tighten the screw (1). 

 
 
 
 
 
 
 
 
 
 
 

 

Turn off the power switch before removing the bobbin case. 
The machine may operate if the treadle is depressed by mistake, which could result in injury. 

1. Turn the machine pulley to raise the needle until it is 

above the needle plate. 

2. Pull the latch (1) of the bobbin case upward and then 

remove the bobbin case. 

3. The bobbin (2) will come out when the latch (1) is 

released. 

 

 

There is an anti-spin spring (3) inside the bobbin case. 
The anti-spin spring (3) prevents the bobbin from racing at 
times such as during thread trimming. 

 

Use bobbins (2) made of light alloy as specified by 
BROTHER. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

2118M 0795M

Front

Long  
groove 

2119M

2120M

For thick materials 

0798M 2121M