Справочник Пользователя для Brother DH4-B980
10. SUMMARY OF DIP SWITCHES
RH-9800
56
10. SUMMARY OF DIP SWITCHES
Always turn off the power supply before changing any of the DIP switch settings.
10-1. Front panel DIP switches
The ON/OFF positions of the DIP switches inside the front panel are checked only once when the power is turned on.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
No.
ON/OFF
Description
ON
Program mode disabled
1
*1
OFF
Program mode enabled
ON
Spare
2
OFF
Spare
ON
Front position
3
OFF
Back position
ON
Counting down to zero
4
OFF
Counting up from zero
ON
Pedal 1 operation
5
OFF
Pedal 2 operation
ON
Compatible with normally closed-type emergency stop switch (new)
6
*3
OFF
Compatible with normally open-type emergency stop switch (old)
ON
Upper thread remaining amount = Large
7
*2
OFF
Upper thread remaining amount = Standard
ON
Spare
8
OFF
Spare
*1
The version of the PROM is given as “E1” or later.
*2
The version of the PROM is given as “D1” or later.
*3
The version of the PROM is given as “F1” or later.
If the position of DIP switch No. 4 is changed, the production counter will be reset to zero.
* The machine is shipped from the factory with the DIP switches set as follows.
* The machine is shipped from the factory with the DIP switches set as follows.
1192Q