Справочник Пользователя для Brother 882-W07
CARE AND MAINTENANCE
339
Ap
pe
ndix
pe
ndix
9
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Turn the main power to OFF.
c
Remove the needle and the presser foot
holder (see pages 66 through 67).
holder (see pages 66 through 67).
d
Remove the flat bed attachment or the
embroidery unit if either is attached.
embroidery unit if either is attached.
e
Grasp both sides of the needle plate cover,
and then slide it toward you.
and then slide it toward you.
a Needle plate cover
→ The needle plate cover is removed.
→ The needle plate cover is removed.
f
Grasp the bobbin case, and then pull it out.
a Bobbin case
g
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the race
and bobbin thread sensor and the
surrounding area.
to remove any lint and dust from the race
and bobbin thread sensor and the
surrounding area.
a Cleaning brush
b Race
b Race
c Bobbin thread sensor
h
Insert the bobbin case so that the S mark
on the bobbin case aligns with the z mark
on the machine.
on the bobbin case aligns with the z mark
on the machine.
*
Align the S and z marks.
a
S mark
b
z mark
c Bobbin case
Note
• Do not apply oil to the bobbin case.
• If lint or dust collects on the bobbin thread
sensor, the sensor may not operate cor-
rectly.
rectly.
a
b
b
a