Справочник Пользователя для Brother S-7000DD

 

 

S-7000DD 

7 

 

Contact your Brother dealer or a qualified electrician 
for any electrical work that may need to be done. 
Do not connect the power cord until all cords have 
been connected. 
The machine may operate if the treadle is depressed 
by mistake, which could result in injury. 
 

 

When securing the cords, do not bend the cords 
excessively or fasten them too hard with staples, 
otherwise there is the danger that fire or electric 
shocks could occur.   
Be sure to connect the ground. If the ground 
connection is not secure, you run a high risk of 
receiving a serious electric shock, and problems with 
correct operation may also occur. 

 

(1)  8-pin operation panel connector 
(2)  10-pin resolver connector 
(3) 12-pin solenoid

 

connector 

(4)  4-pin motor connector 
(5)  3-pin power supply connector 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

(1) Ground wire 
(2) Screw 
(3) Power cord 

 

1. Attach an appropriate plug to the 

power cord (3). (The green and 
yellow wire is the ground wire.) 

2. 

Insert the power plug into a 
properly-grounded electrical outlet. 

 
NOTE:

For Europe specifications, 
Americas 220 V specifications and 
100 V/400 V system specifications, 
refer to “2-4-2. Other cords”. 

 

0587D

0586D

Align the flat edges 

Green and yellow wire (ground wire)

Ground symbol

Lower the tab (6).

Push in securely until the tabs (6) 

engage.