Справочник Пользователя для Brother S-7000DD
S-7000DD
2. INSTALLATION
8
2-4-2. Other cords
For Europe specifications, Americas 220V specifications and 100 V/400 V system specifications, connect the cords according
to the respective specifications.
to the respective specifications.
<Europe specifications>
(1) Filter box
(2) Screws [4 pcs]
(3) Connector
(4) CE bush plate
(5) Screws [2 pcs]
(6) CE D cord cover
(7) Screws [2 pcs]
(8) Staples [5 pcs]
(9) Power cord
(1) Filter box
(2) Screws [4 pcs]
(3) Connector
(4) CE bush plate
(5) Screws [2 pcs]
(6) CE D cord cover
(7) Screws [2 pcs]
(8) Staples [5 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
yellow wire is the ground wire.)
2. Insert the power plug into a
properly-grounded electrical outlet.
<Seen from underneath table>
Leg
Control box
Green and yellow wire (ground wire)
0486D
NOTE:
・
Take care when tapping in the
staples (8) to make sure that they
do not pierce the cords.
staples (8) to make sure that they
do not pierce the cords.
・
Do not use extension cords,
otherwise machine operation
problems may result.
otherwise machine operation
problems may result.