Справочник Пользователя для Brother S-7000DD
S-7000DD
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
23
4-4-3. Setting thread wiping
The initial setting value is ON.
If the thread wiper is connected but thread wiping is not to be carried out, change this setting to OFF.
If the thread wiper is connected but thread wiping is not to be carried out, change this setting to OFF.
1
Activating setting mode
(While pressing the thread trimming disable/F1 key, turn on the
power switch.)
(While pressing the thread trimming disable/F1 key, turn on the
power switch.)
2
Selecting “WiP” (thread wiping)
・
When the D key is pressed, the next
setting is displayed.
setting is displayed.
・
When the C key is pressed, the
previous setting is displayed.
previous setting is displayed.
3
Enabling and disabling thread wiping
・
When the D key is pressed, the “on”
display will appear.
display will appear.
・
When the C key is pressed, the “oFF”
display will appear.
display will appear.
…
Thread wiping enabled
…
Thread wiping disabled
NOTE:
If the SEL key (1) is pressed once more, the
ABCD indicator will switch off and the
display will return to the setting item.
ABCD indicator will switch off and the
display will return to the setting item.
4
The setting will be stored and the display will
return to the setting item.
return to the setting item.
5
Setting mode will be exited and normal
operation will be possible.
operation will be possible.
(Setting item)
0517D
0524D
(Setting item)
(Press four times)
(Setting value)
0522D
(Setting item)
0525D
0520D