Справочник Пользователя для Brother 884-639

19

Attach rolled hem foot.

1

Refer to page 17 for instructions 

 

✽

on changing sewing feet.

Position the fabric (reverse side 

2

facing up) under the presser 
foot. Insert needle approximately 
0.5 cm from the edge of the 
fabric and sew 2 stitches.

0.5 cm

0.5 cm

Thread end

Rolled Hem

Thread

With your right hand, put the 

5

edge of the rolled hem under 
the presser foot, from the spot 
where the threads come out. 
Insert the edge so that it lies 
directly under the needle. Lower 
the presser foot.

Pull gently on threads in left 

6

hand while sewing the first 3-4 
stitches to hold them in place.
Fold hem over about 0.5 cm and 

7

continue feeding folded hem 
under foot while sewing towards 
the curved guide on the foot.

Turn the hand wheel towards 

3

you to raise the needle, raise the 
presser foot, then pull the fabric 
forward.
Be sure not to unthread the 

 

✽

fabric while pulling it forward.

Hold the 4 threads in your left 

4

hand.

CAUTION

Make sure the power to the machine is off before changing presser feet.