Справочник Пользователя для Brother 884-639

22

Reduce the foot pressure and turn 
the dial on the machine lowering the 
feed dogs for free motion quilting.

Note

If the foot is frequently used, be 
sure to apply a small amount of 
oil about once a month to the 
area indicated by the arrows. (If 
too much oil is applied, wipe off 
the excess with a cloth.)

Forked part 

of operation 

lever

Secure the 

capscrew 

with a 

screwdriver.

1

2

Note

Do not press the foot controller 

•

all the way down.  
Try to keep the sewing speed 
low (500  r.p.m. or less).
The fabric may not feed if you 

•

sew at high speeds.
The feed dog for feeding the 

•

cloth may not move if the foot 
pressure on the fabric is too 
strong. Use the presser foot 
pressure adjustment dial to 
achieve the desired results.
It is not advisable or necessary 

•

to use the Pin Feed mode with 
the walking foot.

Insert the forked part of the 

1

operation lever while raised 
in an upright position onto the 
screw on the right side of the 
needle bar, as shown and then 
insert the capscrew.
Tighten the screw securely 

2

with a screwdriver. Tightening 
adequately is important as the 
screw might loosen due to the 
foot and forked operation lever 
vibration.