Справочник Пользователя для WHP Wireless DL360

7.  Check the PCI Hot Plug power LED to be sure the PCI slot is receiving 

power, if applicable. 

8.  Be sure the server ROM is up to date. 

9.  Be sure the controller drivers are up to date. 

10.  Be sure a valid IP address is assigned to the controller and that the 

configuration settings are correct. 

11.  Run Insight Diagnostics ("HP Insight Diagnostics" on page 

failed components as indicated. 

 

 

Action: 

1.  Check the network controller LEDs to see if any statuses indicate the source 

of the problem. For LED information, refer to the network controller 
documentation. 

2.  Be sure the correct network driver is installed for the controller and that the 

driver file is not corrupted. Reinstall the driver. 

3.  Be sure no loose connections (on page 

4.  Be sure the network cable is working by replacing it with a known functional 

cable. 

5.  Check the PCI Hot Plug power LED to be sure the PCI slot is receiving 

power, if applicable. 

6.  Be sure the network controller is not damaged.  

7.  Run Insight Diagnostics ("HP Insight Diagnostics" on page 

failed components as indicated. 

 

Action: 

1.  Be sure no loose connections (on page 

2.  Be sure the server and operating system support the controller. Refer to the 

server and operating system documentation. 

 
  
  

3.  Be sure the new expansion board has not changed the server configuration, 

requiring reinstallation of the network driver.