Руководство По Работе для Zeiss Axiovert 100

3D Microscopy
Axiovert 100/135/135 M

Monitor version

B  40-022-4  e    09/98

29

3D sequences can generally be recorded and
played back using a video recorder.
This requires an S-VHS recorder and an
S-VHS video tape.

 Set the toggle switch of the MCU II to

 Connect Y/C-In of the MCU II with Y/C-Out

of the video recorder

 Connect Y/C-Out of the MCU II with Y/C-In

of the video recorder

 Activate TBC (Time Base Corrector) on the

video recorder

 First activate the Pause/Still key, then the

Record key of the video recorder

 Use the Pause key to interrupt recording
 Interrupt playback using the Pause key and

end it using the Stop key.

Stored 3D video recordings can be printed as
video prints:
Fig. 14

 Set 100 Hz in the MEMORY OUT menu of

the MCU II

 Set Frame in the MEMORY IN menu of the

MCU II

 Store the current image via the Freeze key
 Printing:
 Set 50 Hz in the MEMORY OUT menu of

the MCU II

 Set Frame via the  key;

then use the 

 key to go to Field and print

the two half images - field 1 and field 2 -
one after the other