Справочник Пользователя для Viking Huskylock 936

1.5~2.0mm

5cm

—62—

D

C

B

E

A

(Included in optional Huskylock 936 Cover 

Stitch Kit, Part number: 412 6716-01)

1. Press the stitch selection button until “Auto N” 

“Cover stitch narrow” appears. (Illus. A)

2. Press the fabric selection button until appro-

priate fabric type appears.

    Note: Use needle B & E.

3. Raise the presser foot and snap on Cording 

and Piping foot.

4. Snap cord guide into hole on front of needle 

plate.

5. Insert cord into the hole of the cord guide, 

    then traverse through groove of the cording 

and piping foot.

    Note: 1/8”-1/4” (1.5~2.0 mm) cord can be 

used.

6. Pull the cord tail about 2” (5 cm) behind the 

foot. (Illus. C)

7. lnsert fabric between the foot and cord. Slide 

fabric under foot and up to needles. (Illus. D)

8. Lower presser foot and sew.

    Note: Hold cord behind foot when beginning 

to sew.

9. Shirring with elastic cord: Thread elastic cord 

through cord guide and under foot, same as for 

cording. Slide fabric between elastic cord and 

fabric, up to needles. Sew over elastic cord. Pull 

both ends of elastic to draw up. (Illus. E)

Needle plate

Cord Guide

Cording and 
Piping Foot

Cord Guide