Справочник Пользователя для StarTech.com Life Jacket NETRS2321P

Instruction Manual

6

Enter the IP address you have set for the 

NETRS2321P device into your web browser 

address bar (default IP: 10.1.1.1) and you will 

prompted to login with your user ID and  

password (Default: admin/admin). 

After a successful login, you will see Administrator, 

TCP Mode, UDP Mode, UART, and Reset Device 

selections in left frame of the web console - the 

following sections will describe their function.

Under the ‘Administrator’ heading, you will be able to set/change the device password, 

configure the networking parameters, display the current firmware version, load the 

factory defaults, and perform any future firmware upgrades.

In this page, you can change login ID and Password. The NETRS2321P device supports 

a maximum of 15 characters for password, only alphanumeric characters are allowed 

(“0-9”,”a-z”,”A-Z”).

Press “Update” to store the data. Reset the device to take effect.