Справочник Пользователя для StarTech.com Life Jacket NETRS2321P

Instruction Manual

4

Introduction

•  1 x Serial over IP Device Server 
•  1 x Universal Power Adapter (NA/UK/EU) 
•  1 x Software CD 
•  1 x Instruction Manual
•  1 x DIN Rail Kit

Installation

1.  Plug in the power adapter and connect the RJ45 interface to your LAN.

NOTE: Alternatively, you can also use a crossover cable to connect the NETRS2321P 

directly to your system for the initial configuration.

2.  Press and hold the load default button for more than 3 seconds and less than 10 

seconds, then release it. This will return the serial device server to factory default 

and it will respond to the IP address 10.1.1.1.

3.  Configure the PC to the same IP domain.
4.  Open a web browser and connect to http://10.1.1.1 to open the configuration 

interface. The default login ID will be “admin” and the password will be “admin”.

5.  Once logged in, you will have access to all configuration settings including the 

ability to change the IP address for the device server.

1.  Plug in the power adapter and connect the RJ45 interface to your LAN.
2.  Insert the included CD and launch the VirtualCom software.
3.  Follow the on-screen instructions to install VirtualCom and WinPcap.
4.  Once installed, double-click the VCOM shortcut to launch the 

application.

5.  Click the Search button in the VCOM software window to locate the device.

NOTE: You may receive a firewall notification at this point of the install, please allow 

access to this application